Looking to upgrade your Fuel injection system? This Alpha approved, self tuning fuel injection system delivers all of the benefits without the hassle. It will support a ton of horsepower and install easily without breaking the bank.
The Holley Sniper EFI Self-Tuning Fuel Injection System Base Kit includes:
- 4 injectors
- Calibration Module
- Wiring Harness
- O2 Sensor
- Fuel Pressure Regulator
- MAP Sensor
- IAT Sensor
- TPS Sensor
- IAC Motor
The base kit does not include an inline fuel pump, filters, hose, hardware and fittings.
- Dual Pattern bolt on carburetor replacement, designed to fit 4150 Flange & Spread Bore manifolds - (Spread Bore Sealing Plate Part #9006 is recommended)
- Throttle body mounted ECU – no extra boxes to mount
- Supports up to 650hp with Four 100 Lb/Hr Injectors!
- Only 4 Wiring Connections Required! (Battery +, Battery - , Switched Ignition & RPM)
- Internal fuel pressure regulator eliminates the hassle of plumbing an external fuel pressure regulator (Preset to 58.5 PSI)
- Integrated ignition timing control & coil driver
- High Resolution Full Color Touchscreen for Initial Setup, Tuning, and Gauge Displays.
- Simple Calibration Wizard (Answer a few questions about your engine and it creates the base map, then starts tuning on its own!) - NO laptop required!
- Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI!
- Available in base & master kits (Master kits include complete fuel system consisting of; 20ft of 3/8" Vapor Guard Fuel Hose, 12-920 Fuel Pump, Filters, necessary hardware and bulkhead fitting to return fuel into the tank!)
- The included Genuine Bosch LSU 4.9 Wideband Oxygen Sensor provides realtime Fuel Map Learn!
- OEM Style TPS/IAC and Fuel Pressure regulator, for years of dependable service.
- Included clamp-on oxygen sensor kit ensures a leak free oxygen sensor installation, with Stainless Steel T-Bolt clamps and a Stainless Steel (Weldable) oxygen sensor flange
- Certified to ISO 8846, SAE J1171 & United States Coast Guard Requirements for Ignition Protection & Fire Resistance. Making Sniper EFI the perfect choice for carburetor to marine fuel injection conversions!
- A Flame Arrestor is REQUIRED for marine installations, such as part number, 720-1 or 720-13
- Patent Pending
||Holley Sniper EFI
|Coast Guard Approved
||Classic Gold, Black or Shiny
||Dual Bolt Pattern
||100 lb/hr @ 58.5 PSI
|Inlet / Outlet Size
||9/16-18 Female O-Ring (AN 6)
|Max Horsepower Rating
||650 Naturally Aspirated
We also offer full install, start-up calibrations, and dyno tuning. Unsure if this will work in your vehicle? Give us a call 810-893-6265 or email email@example.com and we will help configure the proper system to your goals!