USD
  • USD
  • EUR
  • GBP
0

Wiring Harnesses

You get what you pay for, and that's why you should rely on Alpha Motorsports' high-performance wiring harness`s to finish up your LS or Ecotec swap project. We can help you harness the power today!

      Alpha 2.4L LE5 Ecotec Stand Alone Wiring Harnes...

      ALPHA MOTORSPORTS 2.4L LE5 ECOTEC STAND ALONE WIRING HARNESS WITH OEM ECM Product Description: Th...

      ALPHA MOTORSPORTS 2.4L LE5 ECOTEC STAND ALONE WIRING HARNESS WITH OEM ECM Product Description: This harness and computer are for a stock or nearly stock 2.4L LE5 Ecotec. I.E. stock injectors and stock throttle body. We use a blend of speed density and MAF tuning, so this setup requires a MAF sensor and does utilize the upstream O2. The controller is an OEM E67and includes a performance tune based off of hundreds of dyno hours. Custom E85 and Race Gas tunes are available for an additional fee....

      $950.00 $950.00 (8 variants)

      HOLLEY EFI - LS COIL SUB HARNESSES

      Factory replacement coil harness for stock LS coils, does not fit LS1 or LS6 Coils. Are you tire...

      Factory replacement coil harness for stock LS coils, does not fit LS1 or LS6 Coils. Are you tired of scouring the junkyard for stock ls coil sub harnesses? Introducing the new Holley EFI LS Coil Sub Harness. This coil sub harness is intended to be used with factory LS coils and various Holley EFI main harnesses with Coil-on-plug connectors. The Holley EFI LS coil sub harnesses are built with the same high quality connectors and wire loom found on all Holley EFI harnesses, guaranteeing a perf...

      $134.95

      HOLLEY EFI - CAN to USB Dongle – Communication ...

      USB/CAN Communication Cable - For Holley EFI - Sniper EFI - Terminator X The CAN to USB communic...

      USB/CAN Communication Cable - For Holley EFI - Sniper EFI - Terminator X The CAN to USB communication cable provides the user with real tuning time access to the ECU. This cable can be used with Holley EFI, Sniper EFI, and Terminator X Tuning Software. Which can be downloaded for free from the Support section of our website! Features: 8’ communication cable for easy access to your ECU.

      $53.99

      Alpha 2.5L LCV Direct Injection Ecotec Stand Al...

      ALPHA MOTORSPORTS 2.5L LCV ECOTEC STAND ALONE WIRING HARNESS WITH OEM ECM Product Description: Th...

      ALPHA MOTORSPORTS 2.5L LCV ECOTEC STAND ALONE WIRING HARNESS WITH OEM ECM Product Description: This harness and computer are for a stock or nearly stock 2.5L LCV Direct Injection Ecotec. I.E. stock injectors and stock throttle body. We use a blend of speed density and MAF tuning, so this setup requires a MAF sensor and does utilize the upstream O2. The controller is an OEM E39 and includes a performance tune based off of hundreds of dyno hours. Custom E85 and Race Gas tunes are available for ...

      $1,550.00 $1,750.00 (4 variants)

      Alpha 2.4 LE5 Ecotec Stage 2 Turbo Calibration

      ALPHA MOTORSPORTS 2.4 LE5 ECOTEC STAGE 2 TURBO CALIBRATION Build Product Description: Have an 2....

      ALPHA MOTORSPORTS 2.4 LE5 ECOTEC STAGE 2 TURBO CALIBRATION Build Product Description: Have an 2.4 LE5 Ecotec turbo kit and it doesn't run right? Want the most performance out of your turbo and your 2.4 LE5 engine? Our Stage 2 turbo calibration is based off of thousands of dyno hours and R&D. Finely tuned VVT, VVE, fuel, and spark tables [among many others] allow for reliable dyno tested performance. At this Stage, we recommend running 60/80# injectors, GT30 sized turbo's, stock to afterm...

      $400.00 $500.00 (2 variants)

      Alpha 2.4 LE5 Ecotec Stage 1 Turbo Calibration

      ALPHA MOTORSPORTS 2.4 LE5 ECOTEC STAGE 1 TURBO CALIBRATION Build Product Description: Have an 2....

      ALPHA MOTORSPORTS 2.4 LE5 ECOTEC STAGE 1 TURBO CALIBRATION Build Product Description: Have an 2.4 LE5 Ecotec turbo kit and it doesn't run right? Want the most performance out of your turbo and your 2.4 LE5 engine? Our Stage 1 turbo calibration is based off of thousands of dyno hours and R&D. Finely tuned VVT, VVE, fuel, and spark tables [among many others] allow for reliable dyno tested performance. This calibration is for the E67 ECM. If you provide your own core, please send to: Alpha ...

      $400.00 $500.00 (2 variants)

      Alpha LS2, LS3, LS7 58x Stand Alone Wiring Harn...

      ALPHA MOTORSPORTS LS2, LS3, LS7 STAND ALONE WIRING HARNESS WITH OEM ECM Product Description: The ...

      ALPHA MOTORSPORTS LS2, LS3, LS7 STAND ALONE WIRING HARNESS WITH OEM ECM Product Description: The LS-58x includes the Gen 4 Chevy LS V8s. Commonly known engines of the Gen 4 variety include LS3, LS7, L99, LSA, LS9, and Vortec Truck variants.The controller we use is an OEM E38 or E67 and includes a performance tune based off of hundreds of dyno hours. Custom E85 and Race Gas tunes are available for an additional fee. This system will work with all LS engines running the 58x reluctor wheel, indi...

      $950.00 $950.00 (4 variants)

      Alpha LS1 Stand Alone Wiring Harness with Blue ...

      ALPHA MOTORSPORTS LS1 SERIES STAND ALONE WIRING HARNESS WITH BLUE RED OEM ECM Product Description...

      ALPHA MOTORSPORTS LS1 SERIES STAND ALONE WIRING HARNESS WITH BLUE RED OEM ECM Product Description: All Alpha Motorsports stand alone engine harnesses are completely plug and play. Our Harnesses are professionally constructed from brand new GM Delphi connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. This harness and computer are for the cable driven throttle body LS1 variants ONLY. Any F-body LS1 from 99-02 IE: Camaro, Firebird, Trans-Am, Corvette Any ...

      $950.00 $999.00