USD
  • USD
  • EUR
  • GBP
0

Swap Components

LS and Ecotec swap components, drivetrain components, electrical components, fuel components - everything you need to button your LS or Ecotec swap.

HOLLEY EFI - FUEL KIT (PERFORM-O-FLEX HOSE, HP ...

Billet Fuel Pump, Billet Regulator, Billet Filters, Earl's Stainless Perform-O-Flex™ hose, Swivel...

Billet Fuel Pump, Billet Regulator, Billet Filters, Earl's Stainless Perform-O-Flex™ hose, Swivel-Seal™ hose ends Holley EFI fuel kits are the perfect addition to your Terminator or Holley EFI kit. They are engineered using Holley fuel pumps, regulators and filters coupled with quality Earl's plumbing to provide a fuel system tailored to the needs of your Terminator EFI System. Holley EFI fuel kits provide everything needed for a complete supply fuel system for the Terminator EFI. The follo...

$801.95 $801.95 (2 variants)

CBM MOTORSPORTS™ CHEVROLET ECOTEC 8"/9" CLUTCH ...

CBM MOTORSPORTS™ CHEVROLET ECOTEC 8"/9" CLUTCH KIT WITH ADAPTER TO VW Product Description: These...

CBM MOTORSPORTS™ CHEVROLET ECOTEC 8"/9" CLUTCH KIT WITH ADAPTER TO VW Product Description: These kits adapt a 2.0L, 2.2L or a 2.4L Chevrolet/CBM Ecotec engine to a Volkswagen bus style transmission. Kits are available in 2, 3 and 4 stages and in either a  8" or 9" clutch disk size. Spline sizes available are Mendeola 2D, Mendeola S4, Albins/GM 26 or Volkswagen. Kits contain: Kennedy 6 puck clutch. Kennedy pressure plate. CBM flywheel. CBM adapter plate and all necessary hardware to install ...

$675.00 $675.00 (12 variants)

CBM MOTORSPORTS™ 2.4 ECOTEC BILLET THROTTLE BOD...

CBM MOTORSPORTS™ 2.4 ECOTEC BILLET THROTTLE BODY RELOCATION FLANGE FOR CUSTOM INTAKE FLANGE MOUNT...

CBM MOTORSPORTS™ 2.4 ECOTEC BILLET THROTTLE BODY RELOCATION FLANGE FOR CUSTOM INTAKE FLANGE MOUNT Product Description: This billet flange allows the use of a relocated throttle body in an application where a custom intake manifold is used on a 2.4 Ecotec engine. This flange is proudly made here in the USA from a solid piece of 6061-T6 aircraft grade aluminum. It is 1/2" thick and milled on every side to ensure a great seal. It is perfect for a race or custom set up. All hardware is included ...

$75.00 $79.99

CBM MOTORSPORTS™ 2.4 ECOTEC BILLET THROTTLE BOD...

CBM MOTORSPORTS™ 2.4 ECOTEC BILLET THROTTLE BODY FLANGE FOR CUSTOM INTAKE TUBE MOUNT Product Desc...

CBM MOTORSPORTS™ 2.4 ECOTEC BILLET THROTTLE BODY FLANGE FOR CUSTOM INTAKE TUBE MOUNT Product Description: This billet throttle body flange allows the use of a custom intake manifold on a 2.4 Ecotec engine. This flange is proudly made here in the USA from a solid piece of 6061-T6 aircraft grade aluminum. It is 1/2" thick and milled on every side to ensure a great seal. It is perfect for a race or custom set up. An O-ring and all hardware is included for trouble free bolt on installation.

$75.00 $79.99

CBM MOTORSPORTS™ 2.0L/2.2L/2.4L ECOTEC BILLET I...

CBM MOTORSPORTS™ 2.0L/2.2L/2.4L ECOTEC BILLET INTAKE FLANGE Product Description: Custom intake f...

CBM MOTORSPORTS™ 2.0L/2.2L/2.4L ECOTEC BILLET INTAKE FLANGE Product Description: Custom intake flange for Chevrolet 2.0, 2.2, 2.4 liter Ecotec. This flange is proudly made in the USA from a solid piece of 6061-T6 aircraft grade aluminum. It is 1/2" thick and milled on each side to ensure a perfect seal. It is perfect for a race or custom intake set up. The ports are slightly over-sized to allow for a ported head.

$65.00 $69.99

CBM MOTORSPORTS™ GM Ecotec Engine to VW Transmi...

CBM MOTORSPORTS™ GM ECOTEC ENGINE TO VW TRANSMISSION ADAPTER PLATE Product Description: This pla...

CBM MOTORSPORTS™ GM ECOTEC ENGINE TO VW TRANSMISSION ADAPTER PLATE Product Description: This plate adapts a 2.0L, 2.2L or a 2.4L GM/CBM Ecotec engine to a Volkswagen bus style transmission. Mounting hardware included. Clutch kit sold separately.

$245.00 $249.00

CBM Motorsports Ecotec Style Billet Remote Oil ...

CBM MOTORSPORTS ECOTEC STYLE BILLET REMOTE OIL FILTER | COOLER ADAPTER Product Description: Cust...

CBM MOTORSPORTS ECOTEC STYLE BILLET REMOTE OIL FILTER | COOLER ADAPTER Product Description: Custom oil filter, oil cooler adapter for all Ecotec style engines (2.0L, 2.2L, 2.4L, L61, LSJ, LE5, LNF). The adapter bolts in place of the factory oil filter cap and is tapped for two -10AN o-ring fittings. It is proudly made here in the USA machined out of 6061-T6 aircraft grade aluminum. This adapter can be used for an oil cooler and remote mounted filter. This will allow you to run a significantl...

$145.00 $149.00

CBM Motorsports, 2.0L/2.2L/2.4L/L61/LE5/LSJ/LNF...

CBM MOTORSPORTS™ 2.0L/2.2L/2.4L/L61/LE5/LSJ/LNF ECOTEC BILLET WATER NECK BLOCK 1.5" BARB INLET Pr...

CBM MOTORSPORTS™ 2.0L/2.2L/2.4L/L61/LE5/LSJ/LNF ECOTEC BILLET WATER NECK BLOCK 1.5" BARB INLET Product Description: Custom water neck fitting for Ecotec style engines (2.0L, 2.2L, and 2.4L). This water neck is CNC machined from a solid block of 6061-T6 aircraft grade billet aluminum. It bolts in place of the factory angled unit and deletes the heater core and recirculating lines. The inlet type is a 1.5" barb fitting that accepts a factory size hose. Our block is already drilled and tapped t...

$120.00 $129.00